Cc9060 update

There is a loader. The firmware says touch adapter not kit though?? Here's someone else with woes I've just tried the xml trick with both and the earliest I could find: Both failed in exactly the same way, and the xml file couldn't be simpler for so I don't see where we can go next with the hacking route So annoying! The xml file is specific to the firmware version and contains checksums for all the files concerned that are updated, it checks the pcb board and ROM chip also.

But I suspect the boot loader is the issue here. With the xml altered correctly the files upload to the head unit and it fails at the end.

If we had an original vw firmware we could try using the loader. All I have is the touch adapter file from here. This is the xml file i used attached but when i look at the loader in a hex editor it seems to be specific to the unit.

So am not sure what would happen if you try flash with the wrong loader, whether it backs up the original or bricks the unit. But come to think of it we are using the wrong loader from the bury file so its worth a shot i guess, but the ldr file does say touchadapter in its hex not touch kit. Maybe the original and new loader files must match?

Maybe someone can access erwin to see if there are any files in there? I think I'll get the box they requested the screen also sent back to Bury, hopefully then it will be loaded with the generic firmware so will be compatible with any future updates. Anybody with a hack? I talked to Bury and them told me that they couldnt upgrade the unit for me. To do that we would need a full flash file. Bury wouldnt upgrade neither would VW.

I have given up this product. Going to return it back to the VW dealer. Hmmm from this i assumed bury would sort it Can anyone confirm yet if replacing only the box gets you a proper bury kit? And that there's not some limitation caused by the screen? I'm tempted with that solution to end all the woes - but not sure if it will work for sure Update: reply from bury You must change the Black box and the Screen, the wiring is the same.

Hello all New member here : Has anyone had any further luck with this issue? I'm currently experiencing issues with the VW touch phone kit and my Motorola Atrix. I'm unsure if it's the same issue as what's being experienced with the iphones but mine will work fine initially when first paired up until the ignition is switched off. When subsequently switching the ignition back on, the phone connects up again but keeps disconnecting after initiating a call or not acknowledging when a call comes in.

I'm going to give it a go updating mine tomorrow some time but thought others would like to know as well. Cheers Edit: Just for the record, my VW dealer who fitted the kit doesn't want to know about the issues, blaming the phone and is very unwilling to look into the issue further. I've also contacted Bury direct and was directed to go back to VW. Just had a look on there, there is a new version of the VW update manager.

Not that it makes a lot of difference as the Bury update manager software works fine with actually connecting to the unit. The issue we have is not having the latest firmware as per the bury version that is compatible with the vw unit. All the software on there is for the touch adapter not the touch kit though.

And there is a file. Here are the links. If you do decide to try flash the touch adapter firmware please post back to say what happens. If the update doesn't take maybe it will with an edited xml file? While they're busy crowing about supplying , of these units in a year maybe they could try supporting us who wasted our money. Really neither vw or bury can be bothered to spend 1 hour to configure their update to work to fix all the issues.

There, the delivered products are then assembled in series assembly. A special feature of the company BURY is competence, the various technologies - software development, electronics development, electronic development and plastics processing - in the house can connect to. Thus, a very wide range of products and developments are covered and supported. The secret of success: The touch-adapter enables secure and convenient mobile phone while driving a car by the cell phone connects wirelessly via Bluetooth mobile phone preparation with Volkswagen.

It also provides a large touch screen display a user-friendly operation. The Bluetooth Adapter is a quick touch in the cradle of the Volkswagen used mobile phone preparation and is due to its high resolution 2. Thanks to the clear and clearly arranged controls the Bluetooth adapter can touch the screen to intuitively by touch.

A special highlight: the Bluetooth technology, the device can automatically synchronize with the phonebook of the mobile phone. Linked to the Volkswagen audio system optimum signal transfer, and voice and sound reproduction is guaranteed. The Bluetooth adapter can touch with the appropriate mobile phone use in all Volkswagen with mobile phone preparation.

This is a great success for the company BURY. I didn't get around to sending the control box back to Bury to be reprogrammed, and it's unlikely I will now. I have been switching off bluetooth on the phone, and p[laying the sat nav commands through the phone speaker.

I've just changed handsets, and chose a new phone without thinkingtpo check compatibility with the Bury first. I now have a Motorola Defy, which isn't compatible. It works handsfree for making and receiving calls, and the voice commands work, but it won't read out text messages. Thanks for the info re Bury. I'm fed up with it and am gonna contact bury to see if they will re flash the ROM.

If i had the damn file i'd do it myself i cant imagine they would have to jtag it. Now i need to remove the control unit from the car, though not sure exactly where its fitted. If anyone has any advice or instruction here I'd be grateful.

Hello again I gave up with all the hacking attempts - I just could not flash that VW kit with the bury firmware update. I decided to take the hit and buy a bury cc kit, where I just replaced the 'brain' box and the display - you can reuse the existing cable for the mic, and also bracket mounts from the VW kit. For me, the box was mounted behind the radio and therefore very easy to replace once you take the radio out plenty of tips on removing the trim using a nectar card can be found online, which reveals the screws to remove the radio.

Look where the wires go from the LCD screen and it should give you a clue where the box is hidden! Thanks steve, my lcd screen is on the rhs near the corner window vent, so will have to see if i can get the control box out. I don't think the touch adapter files would work as the PCB doesn't match that of the touch kit, which can be seen if you compare the xml files. Just a quick update here I haven't done any more with this since last posting but had something happen yesterday, which shows something.

I then connected the vw bury unit, minimised my satnav and switched on bluetooth then connected to the phone. I then made a call via the phone. I noticed there was an option to route the call via speaker or BT though I didn't alter it as it was set to BT symbol.

I then maximised the satnav again and continued the phone conversation. All of a sudden the satnav instructions from the phone are coming through the loudspeakers in the car during the phone call. When the phone call is disconnected the satnav audio is again muted. This shows that the system works and that the satnav audio can be transmitted via BT to the unit and the problem is purely a switching issue with the vw bury unit.

In that it is muting everything when the call is disconnected. Just wanted to update this old thread with some new info: Finally had the VW bury ripped out and replaced. If you remember the VW badged one had no updates of firmware or support from either Bury or VW and muted the phone handset for SatNav instructions and wouldn't play them over BT either.

On advice from both a local fitter specific to VW and Bury I was advised to get the CC which i was assured would work. After initial install i was horrified that the problem was now reversed. Now the BT audio from the SatNav played through the system but was on "Phone" mode permanently when a Satnav app was running on the phone. Effectively meaning you could not use the radio, play a cd or use the MDI kit. This was even worse than before. The only solution was to disable the A2DP so the satnav instructions at least played through the phone speaker.

I'm happy to say though that after a 2 hour phone call to Bury in Germany and a lengthy email, they released a firmware update for the Bury that fixes the problem and the unit behaves as i want.

Its not perfect but it better than it was. This works with Sygic, Tomtom and navigon as well as google maps and waze. I notic navigon is very quiet though. Advanced SystemCare Free. VLC Media Player. MacX YouTube Downloader.

Microsoft Office YTD Video Downloader. Adobe Photoshop CC. VirtualDJ Avast Free Security. WhatsApp Messenger. Talking Tom Cat.

Clash of Clans. Subway Surfers. TubeMate 3. Google Play. Biden to send military medical teams to help hospitals. N95, KN95, KF94 masks. GameStop PS5 in-store restock. Baby Shark reaches 10 billion YouTube views. Microsoft is done with Xbox One.

Windows Windows. Most Popular. New Releases. Desktop Enhancements. Networking Software. Trending from CNET. KG Free.